Skip to main content
Figure 2 | Earth, Planets and Space

Figure 2

From: Thermal conductivities, thermal diffusivities, and volumetric heat capacities of core samples obtained from the Japan Trench Fast Drilling Project (JFAST)

Figure 2

JFAST borehole C0019E and locations of core samples 1 to 4 used in this study. Graphical representation of hole penetration, with intervals of the borehole cored on seismic section Line HD33B (modified from Expedition 343/343T 2013a and Yang et al. 2013). Inset shows coring run numbers 4R–21R; black bar in the coring depth range denotes the total length of the recovered core and the white part shows the length of the core not recovered. Lithology determined on the basis of visual core description is represented in color within the lithologic column. Seismic units A (the frontal prism), B (chert below the decollement), and C (oceanic crust) are shown with brown, yellow, and green shading, respectively. VE, vertical exaggeration; mbsl, meters below sea level.

Back to article page