Skip to main content
Figure 5 | Earth, Planets and Space

Figure 5

From: Tsunami modeling from the seismic CMT solution considering the dispersive effect: a case of the 2013 Santa Cruz Islands tsunami

Figure 5

The cross-section of the maximum tsunami amplitude and bathymetry. The maximum tsunami amplitude (upper) and bathymetry (lower) are shown along a great circle (line A in Figure 1) through the 2013 epicenter (zero position) and station 55012. Red and black lines indicate dispersive and linear long-wave results, respectively. The maximum tsunami amplitude at station 55012 shown in FigureĀ 2 is also plotted by a black dot.

Back to article page