Skip to main content
Earth, Planets and Space
Fig. 7 | Earth, Planets and Space

Fig. 7

From: Thermo-optical simulation and experiment for the assessment of single, hollow, and large aperture retroreflector for lunar laser ranging

Fig. 7

Six fixation methods of CCM to the holder. The red square of each figure represents the backside of CCM base. CCM deformation is calculated for all these fixation methods and two materials (Si and CCZ-EX®), thus 12 cases in total. The names for fixation are attached under each figure. For example, [000] means that three points are fixed perfectly and [012] means that degree of freedom of motion is zero (perfectly fixed), one (motion along one direction other than [z] is allowed), and two (motion within the CCM surface is allowed)

Back to article page