Skip to main content
Earth, Planets and Space
Fig. 1 | Earth, Planets and Space

Fig. 1

From: Toward robust deconvolution of pass-through paleomagnetic measurements: new tool to estimate magnetometer sensor response and laser interferometry of sample positioning accuracy

Fig. 1

Schematic diagram illustrating the setup for laser interferometry measurement. Laser beam is emitted from a the laser detector head, enters the bore of SRM from the side of CW limit switch, and is then reflected by b the laser beam reflector attached on the sample tray. Reflected laser beam goes back to the laser detector head through the bore of SRM, which is used for laser interferometry together with the source beam

Back to article page