Skip to main content
Fig. 2 | Earth, Planets and Space

Fig. 2

From: Earthquake triggering model based on normal-stress-dependent Nagata law: application to the 2016 Mie offshore earthquake

Fig. 2

Simulation of earthquake cycle. a Change in shear stresses. Stress perturbation will be applied at the timing indicated by the arrow. b Change in slip velocities on a log scale. c Change in displacements. d Distribution of a–b. The three white dots denote the points at which the histories are shown. The suffixes in a to c correspond to the points. The assumed parameters are a = 0.03, a–b = − 0.012 and 0.0014 (inside and outside the asperity, respectively), σ = 50 MPa, L = 0.003 m, α = 4.2, and c = 20

Back to article page