Skip to main content
Fig. 10 | Earth, Planets and Space

Fig. 10

From: Simultaneous rupture on conjugate faults during the 2018 Anchorage, Alaska, intraslab earthquake (MW 7.1) inverted from strong-motion waveforms

Fig. 10

Comparison between the observed and synthetic velocity waveforms (0.05–0.4 Hz) during the mainshock. a For each station, the observed waveforms and synthetic waveforms for cases A, B, and C are arranged in order from top to bottom. The amplitudes of each waveform were normalized to the peak amplitudes of the observed three-component waveforms. The number to the right of each waveform denotes the peak amplitude in cm/s. b Detailed view of the east–west component of station AHOU. The two arrows indicate the main pulses. The observed waveform, synthetic waveforms calculated by assuming segments S1 and S2 (case A) and segments S1 and S3 (case B), and synthetic waveforms calculated by assuming only segment S2 (case A) and segment S3 (case B) are arranged in order from top to bottom

Back to article page