Skip to main content
Figure 24 | Earth, Planets and Space

Figure 24

From: Tracing of paleo-shear zones by self-potential data inversion: case studies from the KTB, Rittsteig, and Grossensees graphite-bearing fault planes

Figure 24

The Rittsteig site. Sketch showing the interpretive sections obtained from the SP data analysis (top and middle panels) and from the induced polarization (IP) data analysis (bottom panel). Top panel corresponds to the approximative average results (for the corresponding precise numerical values obtained from inversion, see Figures 22 and 23) recovered by the developed inversion method. Middle panel corresponds to the results obtained by the trial-and-error modeling method (Bigalke et al.2004). The middle and bottom panels are redrawn, respectively, from Figure five of Bigalke et al. (2004) and Figure four of Bigalke and Junge (1999). A borehole and the faults confirmed from drilling are shown at the left side of each panel.

Back to article page