Skip to main content
Figure 2 | Earth, Planets and Space

Figure 2

From: Tsunami modeling from the seismic CMT solution considering the dispersive effect: a case of the 2013 Santa Cruz Islands tsunami

Figure 2

Comparison of tsunami waveforms at four DART stations. Black curves indicate observed waveforms; red and blue curves indicate waveforms obtained by dispersive and linear long-wave models, respectively. The root-mean-squared residual between observation and synthetic waveforms in each gray rectangle are also shown. The observed waveforms are calculated by subtracting tidal components, and all waveforms have had a 2-min low-pass filter applied.

Back to article page